ENTHOBRITE CLZ-941 |
ENTHOBRITE CLZ-941 is a potassium chloride zinc plating system designed for use at higher temperature and lower metal ranges than conventional chloride zincs. These new operational ranges provide faster deposition rates and superior metal distribution. The higher temperature operation reduces solution volume growth problems that can occur in low temperature zinc solutions, provide cost saving by eliminating the need for cooling and reduced loading of waste treatment systems. |
ENTHOBRITE CLZ-950 |
ENTHOBRITE CLZ-950 is a high speed acid zinc plating process used to plate bright and ductile zinc layers. Due to the very good throwing power and high applicable current density ENTHOBRITE CLZ-950 allows increased material throughput at reduced plating time. Ideally suited for rack operation, it has excellent plating initiation, resulting in excellent coverage in low current density areas. The deposits are mirror bright, well levelled, and ductile. The brightener exhibits a high flash point. |
ENTHOBRITE CLZ-970 |
ENTHOBRITE CLZ-970 shows excellent brightness and levelling with superior coverage and throwing power; ideal for low current density operation. Ideally suited for plating cast iron brake components, it has a High cloud point above 80°C, good rinsing properties, superior passivate receptivity and operates with potassium, ammonium, boric acid or as a mixed system. The Brightener is completely water soluble and free of flammable solvents. |
ENTHOBRITE CLZ-2410 |
ENTHOBRITE CLZ-2410 has been particularly developed for plating of cast iron. The process delivers very good initiation, high coverage, fast plating, good levelling and outstanding metal distribution. The process is also recommended for use in high throughput barrel lines with large barrel sizes and offers good passivate receptivity. ENTHOBRITE CLZ-2410 makes it possible to plate at exceptionally high current densities. This will result in a considerably faster plating speed with significantly reduced plating times.
|
Kenlevel XP |
Kenlevel XP, a water-based, Low Foaming system represents the latest development in acid chloride zinc plating. The flexibility of the Kenlevel XP system means that it can be used with Kenlevel XP brightener for maximum economy, or with Kenlevel HT where temperature tolerance up to 50°C is required. Both brightener alternatives offer excellent deposit brightness and levelling. Kenlevel XP is resistant to high current density burning and very receptive to passivation treatments. It may be used with either fall potassium or mixed potassium ammonium baths and is suitable for use in both rack and barrel applications. |
Kenlevel BF2 |
Boric Acid Free system which provides exceptional, uniform brightness over a wide range of current densities. Kenlevel BF2 is recommended for high volume barrel and rack operations where burn-free and uniformly bright deposits are required. It can be operated at higher current densitiesand therefore reduce total plating times. Kenlevel BF2 exhibits superior coverage and throwing power and is also ideal for plating at low current densities. The system can be operated at low zinc concentrations, reducing waste water treatment costs. |